Walkabout Tray replaces common wire or plastic tube racks.
It is insulated to keep samples and reagents protected from room temperature. Just add warm or cold beads and go.
Transportability. You’re free to Walk About.
Things happen when you take your samples, reagents, or cells out of their warm incubating environment and place them onto a cold surface. Why not keep them at temperature while you are setting up your experiment at the bench, under the hood, or while traveling between labs, or where ever you go. Your Walkabout Tray makes a great travel partner.
Replace old, uninsulated tube racks.
The Walkabout Tray is jaw-droppingly clever. It’s a quarter the size of a traditional lab bucket. Making it easy to use under the hood or in tight benchtop spaces. With its superior insulative properties, it keeps your samples and reagents at temperature after removing them from the bead bath, incubator, or the refrigerator.
DURABLE & LIGHTWEIGHT
H 6 X W 6 X D 3″
(H 15.24 X W 15.24 X D 7.6 cm)
DOES NOT INCLUDE A LID
-196°C to 93°C
HAND WASH WITH MILD DETERGENT
MOLDED ONE-PIECE CONSTRUCTION
ONE HALF TO ONE LITER CAPACITY
SMALL SIZE FOR USE UNDER THE HOOD
EXPANDED PVC CONSTRUCTION
SEE HOW IT PERFORMS!
The Walkabout can maintain a 5 ML liquid sample at 37 ºC ±1.3 ºC for 30 minutes after removing it from the water bath, whereas a sample placed in a standard rack will reach RT (25ºC) in same time. Pre-warmed beads (37ºC) were scooped out of the Bead Bath and into the Walkabout. From the same Bead Bath, a 15 ml conical tube containing 5 ml of sample (water) was removed and added to either the Walkabout containing beads or to a standard test tube rack.The sample temperature was monitored over time. Data represent temperature measurements recorded by a single temperature probe. Values represent ±S.E. (n=3).