White 2LabArmor.jpg

Stay Temp Tray

STAY TEMP TRAYS

  No more compromised experiments.  Perfect temperature.  Always.

Stay Temp Tray, inside an oven, incubator, or refrigerator, gives your samples and reagents ultimate temperature fluctuation protection as it resists changes from opening and closing equipment doors.  

Constant Temperature.  Inside and Out.

StayTemp™ Equipment trays are an exciting new upgrade that keeps samples and reagents in your refrigerator, incubator, and laboratory ovens at temperature despite normal hourly fluctuations in air temperature. You no longer have to worry about how many times the doors were opened or whether or not your samples experience a defrost cycle.

Replace old refrigerator, incubator, and oven sample racks.

StayTemp Trays protect your samples while inside your equipment. It keeps your samples and reagents at temperature inside your incubator, oven, or refrigerator.  Even when the door is left open.

Staytemp_Page1_edited.png

STAY TEMP TRAYS specs

AVAILABLE IN THE FOLLOWING SIZES:

        H 6 X W 6 X D 4″ (one liter)

        H 6 X W 12 X D 4″ (two liters)

        H 10 X W 12 X D 4″ (four liters)

FOR USE IN REFRIGERATORS, INCUBATORS, & OVENS

STAINLESS STEEL CONSTRUCTION

HAND WASH

AND

TOWEL DRY

DOES NOT INCLUDE LIDS

39956-003_edited.png

See how the Stay Temp Tray Compares!

Graph_StayTemp1.png

Samples stay at temperature even when refrigerator door is left open for 5 min.  With the refrigerator door open for 5 minutes, a 5 ml liquid sample (water) remained at the set temperature (2 ºC ±0.5 ºC) when stored in a 4 L StayTemp™ equipment Tray. When the same sample was stored in a standard rack, it warmed up to 6ºC. The sample temperature was monitored over time. Data represent temperature measurements recorded by a single temperature probe. Values represent ±S.E. (n=3).