Constant Temperature. Inside and Out.StayTemp™ Equipment trays are an exciting new upgrade that keeps samples and reagents in your refrigerator, incubator, and laboratory ovens at temperature despite normal hourly fluctuations in air temperature. You no longer have to worry about how many times the doors were opened or whether or not your samples experience a defrost cycle. |
|
![]() |
|
Replace old refrigerator, incubator, and oven sample racks.StayTemp Trays protect your samples while inside your equipment. It’s a simple stainless steel container of Beads. It keeps your samples and reagents at temperature inside your incubator, oven, or refrigerator. Even when the door is left open. |
|
Performance
Samples stay at temperature even when refrigerator door is left open for 5 min. With the refrigerator door open for 5 minutes, a 5 ml liquid sample (water) remained at the set temperature (2 ºC ±0.5 ºC) when stored in a 4 L StayTemp™ equipment Tray. When the same sample was stored in a standard rack, it warmed up to 6ºC. The sample temperature was monitored over time. Data represent temperature measurements recorded by a single temperature probe. Values represent ±S.E. (n=3).
|
SpecificationsStayTemp Tray * VARIOUS SIZES FROM ONE TO FOUR LITER CAPACITY * STAINLESS STEEL CONSTRUCTION * FOR USE IN REFRIGERATORS, INCUBATORS, & OVENS * DOES NOT INCLUDE LIDS * HAND WASH, AUTOCLAVE, TOWEL DRY * 3 SIZES AVAILABLE – H 6 X W 6 X D 4″ (one liter) – H 6 X W 12 X D 4″ (two liters) – H 10 X W 12 X D 4″ (four liters)
![]() |