Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance.
With Bead Bath designed expressly for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is +/-1.0 at 37ºC.
The bath always stays on, so you don’t have to plan around warmup times. You don’t need to worry about refilling or low water burnout because there is no water to evaporate.
Lab Armor Bead Baths are up to 50% more energy efficient than a standard lab water bath.
Lab Armor reduces the risk of contamination.
Contaminated samples and reagents result in distorted data and unpredictable outcomes.
Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories. So no more floating accidents.
Achieve reproducible results and have greater confidence in your work with Lab Armor.
Lab Armor Bead Bath 20 Liter
74309-720 with Lab Armor Beads
74300-720 without Beads
EXTERIOR DIMENSIONS (W × D × H)
15.9 × 23.4 × 8.5
(404 mm × 594 mm × 216 mm)
INTERIOR DIMENSIONS (W × D × H)
12 × 17.1 × 6
(305 mm × 434 mm × 152 mm)
0.71 cu.ft. (20 L)
UNIT WEIGHT (without beads)
22.0 lbs (10.0 kg)
OPERATING TEMPERATURE RANGE
Amb +5C - 80C
TEMPERATURE UNIFORMITY - MIDRANGE
TEMPERATURE STABILITY - MIDRANGE
OVERTEMPERATURE PROTECTION (OTP)
POWER VOLTAGE , FREQUENCY AND CURRENT
100-120 VAC, 50/60 Hz, 6.0 Amps
Available in 220 Volt
MAX HVAC LOAD
UL 61010-1, EN 61010-1, CSA 61010-1, CE
Gable Cover Lid Included
74309-714 comes with 15 liters of Lab Armor Beads