MODEL
Lab Armor® Bead Bath 6 Liter
PART ID
-
74309-706 with Lab Armor® Beads
-
74300-706 without Beads
Unique DESIGN.
Lab Armor Bead Baths were specifically designed to work with Lab Armor Beads to optimize their performance.
​
Uniform Temperatures.
With Bead Bath designed expressly for beads, temperatures are consistent and uniform everywhere in the bath. Thermal uniformity is +/-1.0 at 37ºC.
​
Always On.
The bath always stays on, so you don’t have to plan around warmup times. You don’t need to worry about refilling or low water burnout because there is no water to evaporate.
​
Lab Armor Bead Baths are up to 50% more energy efficient than a standard lab water bath.
​
STays Clean.
Lab Armor reduces the risk of contamination.
Contaminated samples and reagents result in distorted data and unpredictable outcomes.
​
Stays Organized.
Unlike water baths that require racks, floats, and bottleneck weights, Bead Bath naturally holds things in place without accessories. So no more floating accidents.
Achieve reproducible results and have greater confidence in your work with Lab Armor.
EXTERIOR DIMENSIONS (W × D × H)
15.9 × 12.3 × 8.5
(404 mm × 312 mm × 216 mm)
INTERIOR DIMENSIONS (W × D × H)
12 × 6.1 × 6
(305 mm × 155 mm × 152 mm)
VOLUME
0.21 cu.ft. (6 L)
UNIT WEIGHT (without beads)
13.0 lbs (5.9 kg)
OPERATING TEMPERATURE RANGE
Amb +5°C - 80°C
TEMPERATURE UNIFORMITY - MIDRANGE
1.0°C
TEMPERATURE STABILITY - MIDRANGE
0.1°C
CONTROLLER TYPE
Digital
DISPLAY RESOLUTION
0.1°C
OVERTEMPERATURE PROTECTION (OTP)
POWER VOLTAGE , FREQUENCY AND CURRENT
100-120 VAC, 50/60 Hz, 3.0 Amps
Available in 220 Volt
MAX HVAC LOAD
1.63K BTUs/hr
SAFETY CERTIFICATIONS
UL 61010-1, EN 61010-1, CSA 61010-1, CE
​
-
Gable Cover Lid included
​
-
74309-706 comes with 5 liters of Lab Armor Beads